论文标题
单像素多模纤维光谱仪通过波前形状
Single-Pixel Multimode Fiber Spectrometer via Wavefront Shaping
论文作者
论文摘要
当光穿过多模纤维时,由于纤维内的复杂干扰而形成了二维随机强度模式。斑点模式对光频率的极端灵敏度为高分辨率多模纤维光谱仪铺平了道路。但是,这种方法需要昂贵的IR相机,并阻碍光谱仪在片上的整合。在这项研究中,我们通过利用波前形状提出了一个单像素多模纤维光谱仪。输入光是借助空间光调节器结构的,最佳相位掩膜(将光聚焦在光纤远端的光线都存储在每个波长上。通过扫描固定最佳掩模下的所有波长来记录聚焦区域中强度的变化。基于强度测量值,我们表明,在近红外制度中,可以成功地重建一个具有两个波长20 pm的波长的任意输入频谱可以成功重建(重建误差〜3%),对应于$ r \ r \ r \ r \ 10^5 $的分辨能力。我们还展示了各种带宽的宽带连续光谱的重建。通过安装单像素检测器,我们的方法以增加的单与噪声比提供低预算和紧凑的检测。
When light passes through a multimode fiber, two-dimensional random intensity patterns are formed due to the complex interference within the fiber. The extreme sensitivity of speckle patterns to the frequency of light paved the way for high-resolution multimode fiber spectrometers. However, this approach requires expensive IR cameras and impedes the integration of spectrometers on-chip. In this study, we propose a single-pixel multimode fiber spectrometer by exploiting wavefront shaping. The input light is structured with the help of a spatial light modulator, and optimal phase masks, focusing light at the distal end of the fiber, are stored for each wavelength. Variation of the intensity in the focused region is recorded by scanning all wavelengths under fixed optimal masks. Based on the intensity measurements, we show that an arbitrary input spectrum having two wavelengths 20 pm apart from each other can be reconstructed successfully (with a reconstruction error of ~3%) in the near-infrared regime, corresponding to a resolving power of $ R \approx 10^5 $. We also demonstrate the reconstruction of broadband continuous spectra for various bandwidths. With the installation of a single-pixel detector, our method provides low-budget and compact detection at an increased single-to-noise ratio.